Not logged in - Login
< back

Renard Serial to RF Transmitter - Removed

Note these instructions are good for Beta 1 Release only

Hardware Serial Modification - Do this modification before getting started

How To Program the Serial to RF Transmitter

  1. Open the IDE
  2. In the RFPixelControl\examples folder find the RenardInterrupt Transmitter

#define RF_NUM_PACKETS 18     // 18 * 30 total Channels can be broadcasted
#define TRANSMIT_CHANNEL 100
#define RENARD_SERIAL_BAUD       57600
#define RECEIVER_UNIQUE_ID 0
#define NRF_TYPE                     RF1_1_3
#define PIXEL_TYPE                     NONE
#define DATA_RATE RF24_1MBPS