Example Setup 1 Intro to Wireless
Overview of Example 1If you have already read the Getting Started guide you know we need to answer two questions (at least) for us to describe a Wireless Setup. So we will start with those questions here.
Hardware needed for example 1:
- 2 RF1 5V
- 1 for use as a transmitter.
- 1 for use as a receiver
- 1 FTDI Programmer
- 1 RS485 Serial Adapter
Q1 : How are we transmitting ?
For this basic setup example we will be transmitting with a Serial based transmitter.
Q2: How are we receiving?
For this example we are going to be receiving data with a RF1 and will be outputting the Renard protocol.
You said this would be easy but its not working!