4 Pin Waterproof Connector Wiring
One of the best ways to connect your pixels to your RF1 controller is using the 4 pin waterproof connector. If you are using 3 wire pixels, its OK, just don't connect Blue wire.
4 Pin Waterproof Connector
http://www.komby.com/4-pin-waterproof-connector
| String Type | White Wire | Blue Wire | Black Wire | Brown Wire |
|---|---|---|---|---|
| Ws2801 | 5v or 12v | CLK | GND | Data |
| Ws2811 | 5v or 12v | NO CONNECT | GND | Data |
| RGB | 5v or 12v | Green | Red | Blue |