Komby rs485 to Holiday Coro DMX
When using an RF1 controller (rev1. blue or rev2 black) This does not apply to the rev .7 and higher boards.
its best to set the jumpers to the dmx setting and make a custom cat5 cable using the following pins
CAUTION: HolidayCoro uses power on different pins on their wiring. Quadrupule check your wire to make sure that you are not miss wired to risk frying your RF1! These instructions are provided as is with no warranty or refund
serial adapter with jumper(if yours has jumpers in the Renard position) to a Holiday Coro pinout