Example Setup 1 Intro to Wireless

Overview of Example 1

If you have already read the Getting Started guide you know we need to answer two questions (at least) for us to describe a Wireless Setup. So we will start with those questions here.

Hardware needed for example 1:

1. 2 RF1 5V
1. 1 for use as a transmitter.
2. 1 for use as a receiver
2. 1 FTDI Programmer
3. 1 RS485 Serial Adapter

Q1 : How are we transmitting ?

For this basic setup example we will be transmitting with a Serial based transmitter.

Q2: How are we receiving?

For this example we are going to be receiving data with a RF1 and will be outputting the Renard protocol.

...

You said this would be easy but its not working!