Not logged in - Login
< back

How-To Main Page

Overview

General RF1 Concepts

RFPixelControl On Air Protocol

How To Setup the Arduino IDE

Receiver Setup

General Receiver Concepts Recommended Receiver Setup Topology Programming an RF1 Receiver

Programming a RF1 Receiver
Controlling Renard Devices

Controlling a Renard Device Wirelessly with Renard or DMX protocol Controlling DMX Devices Controlling a DMX Device Wirelessly(DMX protocol) WM2999 Controller Setup Setting up the WM2999 Receiver Controlling Dumb RGB Adding Dumb RGB to an RF1 Controlling Pixels Setup The FastSPI_LED2 Receiver

Transmitter Setup
  • FTDI Based Transmitter
    • Setup The hardware Setup FTDI Transmitter Hardware
    • Loading and Configuing Firmware
    • Modding the Arduino Environment
  • E1.31 Transmitters
    • Wiznet/ArduinoEthernet Transmitter
      • Setup The hardware
      • Setup E1.31 Unicast Transmitter Hardware
      • Configure your Network
      • Loading and Configuing Firmware
      • Loading Firmware on E1.31 Transmitter
    • ENC28j60 Transmitter [[ENC28J60_Hardware_Configuration| ENC28j60 Hardware Considerations]Considerations