Not logged in - Login
< back

Configuration Settings

{TOC}

NRF_TYPE

Description
What board are you using to connect your nRF24L01+?

Valid Value
  • RF1 - Most RF1 Devices including RF1_12V devices
  • MINIMALIST_SHIELD - Minimalist shield designed to go atop a standard arduino
  • WM_2999_NRF - WM299 specific board
  • RFCOLOR_2_4 - RFColor24 device to control GECEs

PIXEL_PROTOCOL

Description



Valid ValueValues Valid Values:

  • WS_2811
  • WS_2801
  • GECE
  • SM_16716
  • TM_1809
  • TM_1803
  • UCS_1903
  • LPD_8806
  • LPD_6803

PIXEL_DATA_PIN

Description



Valid Value

PIXEL_CLOCK_PIN

PIXEL_COLOR_ORDER

OVER_THE_AIR_CONFIG_ENABLE

RECEIVER_UNIQUE_ID

LISTEN_CHANNEL

DATA_RATE

HARDCODED_START_CHANNEL

HARDCODED_NUM_PIXELS

PIXEL_TYPE

LED_BRIGHTNESS