Overview
General RF1 Concepts
RFPixelControl On Air Protocol
How To Setup the Arduino IDE
Receiver Setup
General Receiver Concepts
Recommended Receiver Setup Topology
Programming a RF1 Receiver
Controlling Renard Devices
Controlling a Renard Device Wirelessly with Renard or DMX protocol Controlling DMX Devices Controlling a DMX Device Wirelessly(DMX protocol) WM2999 Controller Setup Setting up the WM2999 Receiver Controlling Dumb RGB Adding Dumb RGB to an RF1 Controlling Pixels Setup The FastSPI_LED2 Receiver Transmitter Setup FTDI Based Transmitter Setup The hardware Setup FTDI Transmitter Hardware Loading and Configuing Firmware Modding the Arduino Environment E1.31 Transmitters Wiznet/ArduinoEthernet Transmitter Setup The hardware Setup E1.31 Unicast Transmitter Hardware Configure your Network Loading and Configuing Firmware Loading Firmware on E1.31 Transmitter ENC28j60 Transmitter [[ENC28J60_Hardware_Configuration| ENC28j60 Hardware Considerations]