How-To Main Page

Hardware Guides

General RF1 Concepts

• RF1 Pin Descriptions Explainedriptions
• RF1 Pin Descriptions Explained
• RFPixelControl Protocol Explained

• How To Setup the Arduino IDE

Receiver Setup

• General Receiver Concepts
• Recommended Receiver Setup Topology
• Programming an RF1 Receiver

Controlling Renard Devices

• Controlling a Renard Device Wirelessly with Renard or DMX protocol
• Controlling a DMX Device Wirelessly(DMX protocol)
• WM2999 Controller Setup
• Setting up the WM2999 Receiver
• Controlling Dumb RGB
• Adding Dumb RGB to an RF1
• Controlling Pixels
• Setup The FastSPI_LED2 Receiver

Transmitter Setup

• FTDI Based Transmitter
• FTDI Example Setup Diagram (Single Transmitter Only)
• Setup The FTDI Transmitter
• Loading and Configuing Firmware
• Modding the Arduino Environment
• E1.31 Transmitters
• E1.31 Example Setup Diagram For Multiple Transmitters
• Wiznet/ArduinoEthernet Transmitter
• Setup E1.31 Unicast Transmitter Hardware
• Configure your Network
• Loading Firmware on E1.31 Transmitter
• ENC28j60 Transmitter ENC28j60 Hardware Considerations